[SOLVED] PTZ Tracking affected by digital artifacts in image

Xeoma Software

Moderators: Admin_N, Administrator, Admin_P, Admin_K

[SOLVED] PTZ Tracking affected by digital artifacts in image

Postby NginUS » Sat Jun 09, 2018 11:11 pm

I have the trial running & it's working better than the free edition in that the IP scan finds a better-looking image than otherwise. But I get these pixel distortions & they're seen as false motion.

When I look at the camera's onboard webserver that displays via flash, I don't have any problems.

Untitled.jpg
Untitled.jpg (83.88 KiB) Viewed 4922 times
Last edited by NginUS on Tue Jul 10, 2018 6:47 am, edited 1 time in total.
NginUS
 
Posts: 5
Joined: Sat Jun 09, 2018 9:41 pm

Re: PTZ Tracking affected by digital artifacts in image

Postby NginUS » Fri Jun 29, 2018 9:56 am

bump
NginUS
 
Posts: 5
Joined: Sat Jun 09, 2018 9:41 pm

Re: PTZ Tracking affected by digital artifacts in image

Postby Admin_P » Fri Jun 29, 2018 2:04 pm

Hello! You may want to try the latest version (18.6.14) and set TCP as Transport protocol type in the Universal camera settings. If the distortions persist, check the bitrate settings for the stream in the camera's admin page. When bitrate is unstable (too high or too low), distortions can occur.
Admin_P
 
Posts: 245
Joined: Wed Aug 24, 2016 1:49 pm

Re: PTZ Tracking affected by digital artifacts in image

Postby NginUS » Sun Jul 01, 2018 1:00 am

Admin_P Wrote:Hello! You may want to try the latest version (18.6.14) and set TCP as Transport protocol type in the Universal camera settings. If the distortions persist, check the bitrate settings for the stream in the camera's admin page. When bitrate is unstable (too high or too low), distortions can occur.


TCP is far better, thanks.
NginUS
 
Posts: 5
Joined: Sat Jun 09, 2018 9:41 pm


Return to Xeoma - General discussion

Who is online

Users browsing this forum: No registered users and 19 guests

cron