I've just set up a new IP camera. I'm 95% sure it's a Maygion IP Camera V3 (profile works in ispy). I'm able to get video into Xeoma via http://192.168.100.126/videostream.asf?pwd&usr. Audio (not working) http://192.168.100.126/GetAudioData.cgi?Format=Pcm
These settings were created by Xeoma under the Maygion profile.
I'll use iSpy as a reference as functions are working in it which aren't working in Xeoma. These are the issues:
No audio in Xeoma but works in iSpy
No PTZ in Xeoma but works in iSpy with the following profile:
- Code: Select All Code
<Camera id="18">
<Makes>
<Make Name="MayGion" Model="v3" />
</Makes>
<CommandURL>/cmd.xml?cmd=moveptz</CommandURL>
<Commands>
<Center>
</Center>
<Left>dir=left</Left>
<LeftUp>
</LeftUp>
<Right>dir=right</Right>
<RightUp>
</RightUp>
<Up>dir=up</Up>
<Down>dir=down</Down>
<LeftDown>
</LeftDown>
<RightDown>
</RightDown>
<Stop>dir=none</Stop>
<ZoomIn>
</ZoomIn>
<ZoomOut>
</ZoomOut>
</Commands>
<ExtendedCommands>
</ExtendedCommands>
</Camera>
Another issue that I don't expect to be addressed here is that the camera is capable of producing h.264 at 1280x720 resolution which can be accessed via its built in web server. I haven't been able to find out what's required to capture this stream, all Xeoma and iSpy can find is the low res 4:3 stream. I'll need to do more research. I can set up a port for admins to access the camera directly if required.
You guys have been great for support and I hope you can help out with these issues.
Thanks