Web accessed archive mode always starts from :00 seconds

Xeoma Software

Moderators: Admin_N, Administrator, Admin_P, Admin_K

Web accessed archive mode always starts from :00 seconds

Postby catabrown » Sun May 20, 2018 11:33 pm

Hello,

There is a behavior I have noticed and wanted to know if it is normal or as intended. Lets say there is a motion event captured at 10:02 and 25 seconds. I can see this in the xeoma console on the local computer which xeoma is running.
When I connect via web server, there is a dropdown to show what minutes contain motion events. If I select the entry for [10:02], the counter starts counting up from 10:02 and 0 seconds, 10:02 and 1 seconds, 10:02 and 3 seconds etc. There is no movement on the video up until 25 seconds, most likely due to the fact there is no video data captured during this time of 10:02:00 - 10:02:24.

Is this normal behavior? I would think that selecting 10:02 from the dropdown in the web archive interface should immediately begin playing at the point where motion was detected. There are times motion was at 55 seconds of the minute so I have to sit and wait 55 seconds for the counter to make it's way from zero in order to see the motion event.

Can you confirm if this is normal behavior and could it be changed with a setting?

thanks
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby Admin_P » Wed May 23, 2018 9:09 am

Hello! Thank you for pointing this out, that is not intended behavior and requires fixing on our side (the web-archive navigation needs fine-tuning).
Admin_P
 
Posts: 245
Joined: Wed Aug 24, 2016 1:49 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Fri May 25, 2018 4:55 pm

Hello,

I am glad to help. Is there any estimate on when this might be corrected?

I'm also seeing many selections in the drop down box of minutes which appear to have less than one second of motion (ie. I select it and seconds count up for a very brief amount of time and then it automatically increments to the next minute, while no video gets to be displayed. I have not investigated this myself yet (by checking at the local console) but wondering if you have seen this also? It may be tied into how the software programmatically decides if a motion event exists for a given minute.
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby tkhyla » Tue Jun 05, 2018 3:19 pm

still same error in 18.5.29 :(
tkhyla
 
Posts: 19
Joined: Tue Jan 21, 2014 7:18 am

Re: Web accessed archive mode always starts from :00 seconds

Postby tkhyla » Fri Jun 08, 2018 2:07 pm

Works little bit better in latest 18.6.5 version after re-index archives. But not fully functionality yet. Still hang every ~3 video.
tkhyla
 
Posts: 19
Joined: Tue Jan 21, 2014 7:18 am

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Thu Jun 28, 2018 7:21 pm

Does this problem appear in the Xeoma android app? I have not installed it and would rather not yet if it has the same issue.

Thanks
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Thu Aug 23, 2018 6:00 pm

bump... Anyone? Is this problem evident in the Android app? and has there been any progress at correcting this behavior as of yet?
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby Admin_P » Wed Aug 29, 2018 8:27 am

Hello! This behavior has been fixed, the next beta should display all the archives via browsers correctly.
Admin_P
 
Posts: 245
Joined: Wed Aug 24, 2016 1:49 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Sat Sep 22, 2018 3:48 pm

Hello, thank you for the update. I see all uploads on the website as version 18.7.10 and showing a date of July 10, 2018. When will the new Beta version with this fix be available?
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby Admin_P » Tue Sep 25, 2018 9:45 am

Psst, don't tell anyone, but the new version should be out this week :)
On a more serious note, we are testing the final pieces of the update: if the tests are all positive - the version is ready.
Admin_P
 
Posts: 245
Joined: Wed Aug 24, 2016 1:49 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Sun Oct 14, 2018 4:55 pm

Still no updated beta. Being beta, I would think excessive testing is not necessary? Is there any update?
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm

Re: Web accessed archive mode always starts from :00 seconds

Postby catabrown » Thu Oct 18, 2018 6:31 pm

Can you at least give an ETA if this is not ready yet? I am trying to set something up for somebody else and need to know if this will not be available soon he will need to use something else.

thanks
catabrown
 
Posts: 20
Joined: Tue May 01, 2018 4:58 pm


Return to Xeoma - General discussion

Who is online

Users browsing this forum: Google [Bot] and 4 guests

cron